{"product_id":"3d-printer-accessories-e3d-v6-hotend-heating-kit-12v-24v-50w-high-temperature-heating-tube-ntc-100k-thermistor-print-head-replacement-parts","title":"3D Printer Accessories E3D V6 Hotend Heating Kit 12V 24V 50W High Temperature Heating Tube NTC 100K Thermistor Print Head Replacement Parts","description":"\u003ch1\u003eE3D V6 50W Heating Kit with 12V or 24V Tube and NTC 100K Thermistor\u003c\/h1\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"E3D V6 50W heating kit with 12V 24V heating tube and NTC 100K thermistor for 3D printer hotend\" src=\"https:\/\/images.seoo.uk\/src\/products\/shopify_export\/US13\/1945\/2025-10-20\/original-image\/1621579191695.webp\"\u003e\u003c\/div\u003e\n\u003cp\u003eThis E3D V6 compatible heating kit gives you the heating and temperature sensing parts needed to keep a 3D printer hotend working. The 50W heating tube is offered in 12V and 24V versions, and an NTC 100K thermistor is included for temperature feedback. The kit is listed as a PT100 print head 12V kit with a gross weight of 50g. It is supplied as printer accessories in a default configuration. Whether you are replacing a failed heater or refreshing a worn hotend, matching the voltage and thermistor type to your machine is the first step. The source listing does not state heater cartridge diameter, thread size, cable length, or maximum temperature, so these should be checked against your existing parts. This is a practical replacement kit for E3D V6 style hotends.\u003c\/p\u003e\n\u003ch2\u003eFeatures and Construction\u003c\/h2\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"E3D V6 50W heating kit with 12V 24V heating tube and NTC 100K thermistor for 3D printer hotend\" src=\"https:\/\/images.seoo.uk\/src\/products\/shopify_export\/US13\/1945\/2025-10-20\/original-image\/1621579191696.webp\"\u003e\u003c\/div\u003e\n\u003cp\u003eThe core of this kit is the 50W heating tube paired with an NTC 100K thermistor. Both parts are intended for E3D V6 style hotends. The listing describes the item as printer accessories under the accessory type PT100 print head 12V kit PT10. Gross weight is 50g. Details such as the heater cartridge dimensions, thread, and cable length are not given, so measure your current components before ordering.\u003c\/p\u003e\n\u003ch3\u003eMaterial and Build\u003c\/h3\u003e\n\u003cp\u003eThe source text does not specify the metals or insulation used in the heating tube or thermistor. What is stated is the 50W rating, 12V or 24V compatibility, and NTC 100K thermistor type. These are the figures to match against your printer's specification. Because material details are absent, this description stays with the facts provided. The 50g gross weight covers the packed kit. For fitment, rely on your hotend model and existing hardware rather than assumptions about construction.\u003c\/p\u003e\n\u003ch3\u003eSize and Practical Fit\u003c\/h3\u003e\n\u003cp\u003eThe only measurement in the source data is the 50g gross weight. No heater cartridge diameter, length, thread size, or cable length is listed. This means fitment should be confirmed by measuring your current heating tube and thermistor before purchase. The kit is intended for E3D V6 compatible hotends, and the 12V or 24V option must match your printer's power system. The NTC 100K thermistor must also match the value expected by your firmware. Checking these points avoids a mismatch.\u003c\/p\u003e\n\u003ch2\u003eUses and Placement\u003c\/h2\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"E3D V6 50W heating kit with 12V 24V heating tube and NTC 100K thermistor for 3D printer hotend\" src=\"https:\/\/images.seoo.uk\/src\/products\/shopify_export\/US13\/1945\/2025-10-20\/original-image\/1621579191697.webp\"\u003e\u003c\/div\u003e\n\u003cp\u003eThis kit is aimed at 3D printer maintenance and repair. It suits users who need to replace a heating tube or thermistor on an E3D V6 style hotend. The 12V and 24V options cover common printer power configurations. Because the listing is for printer accessories in a default configuration, the exact contents should be confirmed against your order. Typical use is inside the hotend assembly, where the heater and thermistor connect to the mainboard.\u003c\/p\u003e\n\u003ch3\u003eEvent or Professional Use\u003c\/h3\u003e\n\u003cp\u003eFor workshops, print farms, or service technicians, keeping spare heating kits on hand reduces downtime when a hotend fails. The 50W heating tube and NTC 100K thermistor are the parts most often replaced during hotend servicing. Matching the voltage and thermistor type to each machine is essential. The source data does not state a maximum temperature or duty cycle, so operate within your printer manufacturer's settings. This kit is a replacement part, not an upgrade with published performance gains.\u003c\/p\u003e\n\u003ch3\u003eEveryday Home Use\u003c\/h3\u003e\n\u003cp\u003eHome users can use this kit to bring a printer back into service after a heater or thermistor fault. The 12V or 24V choice matches common desktop printer power supplies, and the NTC 100K thermistor is a widely used type. Fitting requires basic tools and access to the hotend wiring. Because the listing gives no cable length or connector type, check these against your mainboard before ordering. The 50g gross weight reflects a small, light package suitable for standard delivery.\u003c\/p\u003e\n\u003ch2\u003eBenefits and Buying Value\u003c\/h2\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"E3D V6 50W heating kit with 12V 24V heating tube and NTC 100K thermistor for 3D printer hotend\" src=\"https:\/\/images.seoo.uk\/src\/products\/shopify_export\/US13\/1945\/2025-10-20\/original-image\/1621579191698.webp\"\u003e\u003c\/div\u003e\n\u003cp\u003eThe value here is in having the heating tube and thermistor together as a matched kit for E3D V6 hotends. With 12V and 24V options and an NTC 100K thermistor, you can select the version that fits your printer. The listing is factual and limited, so the practical benefit is straightforward replacement rather than claimed performance improvements. Confirm your specifications before buying.\u003c\/p\u003e\n\u003ch3\u003eReuse and Low Maintenance\u003c\/h3\u003e\n\u003cp\u003eNo reuse or maintenance claims are made in the source data. The kit is a replacement part for a hotend, and maintenance intervals depend on your printer and materials. The 50W heating tube and NTC 100K thermistor are service items that may need periodic replacement. Because no lifespan or cleaning instructions are provided, follow your printer manufacturer's guidance. Keeping a spare kit can reduce waiting time when a part fails.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose This Product\u003c\/h3\u003e\n\u003cp\u003eChoose this kit if you need an E3D V6 compatible heating tube in 12V or 24V with an NTC 100K thermistor. The source listing provides a clear product type, voltage options, wattage, thermistor value, and a 50g gross weight. It does not provide dimensions, thread sizes, or maximum temperature, so those must be checked separately. If your machine matches the stated specifications, this is a direct replacement option. If not, verify compatibility before ordering.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"E3D V6 50W heating kit with 12V 24V heating tube and NTC 100K thermistor for 3D printer hotend\" src=\"https:\/\/images.seoo.uk\/src\/products\/shopify_export\/US13\/1945\/2025-10-20\/original-image\/1621579215213_05239908-e67f-4365-858e-1e817da69aed.webp\"\u003e\u003c\/div\u003e","brand":"fcm1e0-ws","offers":[{"title":"default","offer_id":53876778533200,"sku":"CJSJ113808801AZ","price":16.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9440\/3664\/files\/1621579191696.webp?v=1793163048","url":"https:\/\/xkkman.com\/products\/3d-printer-accessories-e3d-v6-hotend-heating-kit-12v-24v-50w-high-temperature-heating-tube-ntc-100k-thermistor-print-head-replacement-parts","provider":"xkkman.com","version":"1.0","type":"link"}