6.5-inch Car Subwoofer with 100 Magnet and 35 Core for DIY Audio

This 6.5-inch car subwoofer is supplied as a single speaker for car audio and home audio projects. The source specification lists a 100 magnet, 35 core, paper diaphragm, and external magnet magnetic circuit. It is rated at 60W continuous power with a 120W maximum, and sensitivity is given as 88dB. These are the concrete figures available: no frequency response, impedance, mounting depth, cutout diameter, or enclosure volume is stated. For buyers who already know the 6.5-inch size suits their build, this speaker offers a straightforward option for replacing a worn driver or starting a DIY setup. The external magnet design and paper cone are both stated, and the single-speaker pack means you receive one unit.

Features and Construction

The specification centres on a 6.5-inch speaker size, a 100 magnet, a 35 core, a paper diaphragm, and an external magnet magnetic circuit. Rated power is 60W and maximum power is 120W, with sensitivity at 88dB. These details are taken directly from the source text and form the basis for matching the speaker to an amplifier and enclosure.

Material and Build

The diaphragm is made from paper, as stated in the source. The magnetic circuit is an external magnet type, and the magnet size is listed as 100 with a 35 core. These construction details are the only ones provided. No information is given about the voice coil material, surround, spider, or frame, so those aspects cannot be described. The paper diaphragm is a known speaker cone material, and the external magnet format means the magnet sits outside the voice coil gap. Buyers should note that no weatherproofing or moisture resistance is claimed for this speaker.

Size and Practical Fit

The speaker size is 6.5 inches. That is the only physical dimension supplied. The 100 magnet and 35 core are also stated, but these are not overall dimensions. There is no mounting depth, cutout diameter, or outer frame measurement in the source. This means you should measure your existing speaker aperture or enclosure before ordering if fit is critical. The 6.5-inch size is common in car doors, rear decks, and some home audio cabinets, but the source does not confirm specific vehicle or cabinet compatibility. Use the 6.5-inch figure as your starting point and check clearance behind the mounting surface for the external magnet.

Uses and Placement

The stated application is speaker, covering car audio and home audio DIY use. With 60W rated power, 120W maximum, and 88dB sensitivity, the speaker is intended to be driven by a suitable amplifier. The source does not specify impedance, so you should confirm that your amplifier can operate safely with the speaker before connecting it.

Event or Professional Use

This 6.5-inch speaker can be used in DIY audio projects where a single driver is needed for a car or home system. The 100 magnet and 35 core construction, along with the external magnet circuit, are the stated build features. The 88dB sensitivity means it can produce output from relatively modest amplifier power, though the exact amplifier matching depends on impedance, which is not given. For professional installers or hobbyists building a custom system, the single-speaker pack allows you to order the exact number of units required for a project without being tied to a multi-pack.

Everyday Home Use

At home, this speaker could be used in a DIY cabinet or as a replacement driver in a compatible enclosure. The paper diaphragm is a common material in home audio speakers, and the 6.5-inch size fits many standard cutouts, though you should verify your own cabinet dimensions. Rated at 60W continuous and 120W maximum, it can handle everyday listening levels when paired with a suitable amplifier. Sensitivity is 88dB, which is a moderate figure and means it does not require a high-powered amp to reach useful volume. No frequency response is stated, so bass, midrange, and treble performance cannot be described from the source.

Benefits and Buying Value

The main value of this speaker lies in its stated components: a 100 magnet, 35 core, paper diaphragm, and external magnet circuit, with 60W rated and 120W maximum power handling. It is sold as a single unit, which suits replacement or custom builds. No price, warranty, or longevity claims are made in the source, so value is assessed on the specification alone.

Reuse and Low Maintenance

Because the speaker is a passive component with a paper diaphragm and external magnet, there are no user-serviceable parts described in the source. Maintenance is minimal: keep it dry, avoid physical damage to the paper cone, and ensure the mounting is secure. No specific care instructions are provided, so only basic handling precautions apply. The paper diaphragm should not be exposed to moisture or excessive dust, as these can affect performance over time, but no manufacturer claims are made about durability or lifespan. If the speaker is installed correctly and not overdriven beyond its 60W rated or 120W maximum power, it should function as intended as part of a compatible audio system.

Why Choose This Product

Choose this 6.5-inch car subwoofer if you need a single speaker with a 100 magnet, 35 core, paper diaphragm, and external magnet circuit, rated at 60W continuous and 120W maximum with 88dB sensitivity. The specification is clear and limited to what is stated. It is suitable for DIY car audio or home audio projects where a 6.5-inch driver is required. No additional accessories, mounting hardware, or grille are included, so check whether you need those separately. Because the source does not list impedance, frequency response, or exact mounting dimensions, this speaker is best suited to buyers who can confirm compatibility from the 6.5-inch size and the listed magnet and core details.