Automatic Car Phone Holder Wireless Charger PC+ABS 125x78x90mm Type-C 10W 7.5W 5W Infrared Induction Gold Silver Dash Vent Clip
Automatic Car Phone Holder Wireless Charger with Infrared Induction and Type-C

This intelligent induction car phone holder wireless charger is designed for in-car phone mounting and wireless charging in one unit. It uses infrared sensing with an effective distance of 1–15cm, allowing the bracket to operate automatically rather than relying on a manual clamp. The holder supports wireless charging output of 10W, 7.5W and 5W with automatic identification, and it is compatible with the WPC V1.2.4 standard. A Type-C charging interface is used for power input, with stated input of 5V/2A and 9V/1.67A and a withstand voltage up to 16V. The product is made from PC+ABS and measures 125×78×90mm, with a packing size of 155×103×67mm. It is available in Gold or Silver and includes a clip, charging cable, manual and two spare sponge pads. Foreign object detection and 60°C over-temperature protection are also stated. The measured system charging efficiency is up to 79%.
Features and Construction

The main construction and functional details are set out in the source specifications. These cover the housing material, physical size, charging interface, wireless output, sensing distances and safety functions. Together they define how the holder is powered, how it detects a phone and what protection measures are included during use.
Material and Build
The holder is made from PC+ABS, a stated plastic blend used for the body. Its product size is 125×78×90mm, and the packing size is 155×103×67mm. The design uses a Type-C charging interface and includes a car wireless charging bracket, clip, charging cable, manual and two spare sponge pads. The source does not provide further detail on internal component materials or surface finish, so those points should not be assumed.
Size and Practical Fit
The stated dimensions are 125×78×90mm for the product and 155×103×67mm for the pack. Wireless charging sensing distance is 0–5mm, which indicates how closely the phone must sit to the charging area. The infrared effective sensing distance is 1–15cm. These figures are the only size and distance data given, and no other fit measurements are stated.
Uses and Placement

This product is intended for car use as a wireless charging bracket. It can be mounted with the supplied clip, and the automatic induction function is suited to repeated placement and removal of a phone during journeys. The charging and sensing distances should be observed for consistent operation.
Event or Professional Use
For drivers who need a phone held securely while using in-car navigation or hands-free functions, the automatic bracket and wireless charging combination can reduce the need to handle a charging cable. The Type-C interface and stated input voltages allow connection to a suitable car power source. Output is automatically identified across 10W, 7.5W and 5W, depending on the device and conditions.
Everyday Home Use
Although designed as a car wireless charging bracket, the unit could be used wherever a suitable power supply and mounting clip arrangement are available. The 1–15cm infrared sensing range and 0–5mm wireless charging distance remain the key operating limits. The Gold or Silver colour options may be chosen to match the surrounding interior or setup.
Benefits and Buying Value

The practical value lies in combining automatic induction, wireless charging and safety detection in one car accessory. The source confirms multiple charging outputs, foreign object detection, over-temperature protection and a measured system charging efficiency of up to 79%. These are factual points that support buying consideration without needing extra claims.
Reuse and Low Maintenance
The holder is supplied with a charging cable, clip, manual and two spare sponge pads. The spare pads allow for adjustments to the mounting fit if needed. No cleaning or maintenance instructions are given in the source, so only minimal care should be taken, such as keeping the charging area free from obstruction and checking the cable and clip periodically.
Why Choose This Product
Choose this product if you want a car phone holder with automatic infrared induction, wireless charging and a Type-C interface. It offers 10W, 7.5W and 5W output with automatic identification, FOD foreign object detection and 60°C over-temperature protection. It is made from PC+ABS, measures 125×78×90mm, and comes in Gold or Silver with a clip, charging cable, manual and two spare sponge pads.
