Dual arm laptop stand holder with 440mm arms, aluminum alloy and ABS, for 10-15.6 inch laptops and 9-10 inch tablets.

Dual Arm Laptop Stand Holder Aluminum Alloy and ABS with 440mm Arms Height Adjustable 30-400mm 360 Degree Rotation for 10-15.6 Inch Laptops and 9-10 Inch Tablets Desktop or Eyelet Mount

default

£172.98

Dual Arm Laptop Stand Holder Aluminum Alloy and ABS with 440mm Arms Height Adjustable 30-400mm 360 Degree Rotation for 10-15.6 Inch Laptops and 9-10 Inch Tablets Desktop or Eyelet Mount

£172.98

Dual Arm Laptop Stand Holder with 440mm Arms and 360 Degree Rotation

This dual arm laptop stand holder is designed for setups that need to hold a laptop and a tablet at the same time. It uses two arm sections, each 440mm long, and supports 10-15.6 inch laptops and 9-10 inch tablets. The height adjustable range is 30-400mm, so you can raise or lower the devices according to your seating position and desk layout. Both arms rotate 360 degrees. The laptop section also rotates 360 degrees with a 25 degree tilt, while the tablet section rotates 180 degrees with an 80 degree tilt. Maximum loading is 7kgs. Installation can be done by desktop mount or eyelet mount, and the supported desktop thickness for desktop mounting is 0-75mm. The stand is made from aluminum alloy and ABS.

Features and Construction

The stand combines a dual arm format with adjustable height, rotation, and tilt. Its stated materials are aluminum alloy and ABS, and the two arm sections measure 440mm. These features support a work setup where a laptop and a tablet need to be positioned separately but held by one mounting solution.

Material and Build

The stand is made from aluminum alloy and ABS. The aluminum alloy forms part of the main structure, while ABS is used in the assembly as stated in the source text. The two arm sections are 440mm long, which gives each device its own arm rather than sharing a single support. The maximum load is 7kgs. No additional material performance claims, coatings, or finishes are provided in the source data.

Size and Practical Fit

The stand suits 10-15.6 inch laptops and 9-10 inch tablets. Arm length is 440mm, and the height adjustable range is 30-400mm. For desktop mounting, the supported desktop thickness is 0-75mm. These measurements help you check whether the stand matches your devices and desk before buying. No other dimensions are stated in the source text.

Uses and Placement

This dual arm stand can be used in settings where a laptop and a tablet are both part of the daily routine. It offers desktop mount and eyelet mount installation, and its rotation and tilt ranges allow for different viewing positions. The stand does not include a keyboard tray or cable management in the source data.

Event or Professional Use

For professional setups, the stand can hold a laptop and a tablet on separate arms. The 440mm arm length and 30-400mm height range allow the devices to be placed at different heights. Both arms rotate 360 degrees, and the tablet section tilts up to 80 degrees. The 7kgs maximum load applies to the stand as stated. Installation can be by desktop mount or eyelet mount, with desktop thickness support of 0-75mm.

Everyday Home Use

At home, the stand can support a 10-15.6 inch laptop and a 9-10 inch tablet at the same time. The laptop section rotates 360 degrees with a 25 degree tilt, and the tablet section rotates 180 degrees with an 80 degree tilt. Height adjusts from 30mm to 400mm. The aluminum alloy and ABS construction is as stated in the source text. No colour options or care instructions are provided.

Benefits and Buying Value

The main practical value of this stand is its ability to hold two devices using two arms while offering adjustable height, rotation, and tilt. It supports specific laptop and tablet sizes, and it can be mounted in two ways. The stated maximum load is 7kgs.

Reuse and Low Maintenance

Because the stand uses a mounting format rather than a fixed desk position, it can be reused when you change desks, provided the desktop thickness is within 0-75mm for desktop mounting. The stated materials are aluminum alloy and ABS. No specific cleaning products, maintenance schedules, or replacement parts are given in the source text, so only general handling according to the stated materials is supported.

Why Choose This Product

Choose this stand if you need a dual arm holder for a 10-15.6 inch laptop and a 9-10 inch tablet. It offers 440mm arm sections, a height range of 30-400mm, 360 degree arm rotation, 360 degree laptop rotation, 180 degree tablet rotation, a 25 degree laptop tilt, and an 80 degree tablet tilt. Maximum loading is 7kgs. It installs by desktop mount or eyelet mount, and it is made from aluminum alloy and ABS.